- Email: firstname.lastname@example.org
- Mobile No: 9871578231
- Street: uttam nagar
- City: new delhi
- State: Delhi
- Zip/Postal Code: 110059
- Listed: June 23, 2016 3:29 pm
- Expires: This ad has expired
Channel: 4 CH
Remote Control Distance: 50m/150ft
(Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference.)
Encode: Fixed code, soldering 2260 2262
Frequency: 315/433Mhz (Default 315MHz)
Power Supply: 1 X 12V/23A (NOT Include)
Channel: 4 CH
Decode: Learning code
Power Supply (Operating Voltage): DC 12V
Relay: 20A/125VAC, 20A/14VDC
State current: ≤ 6mA
Operating Temperature: -40’C ~ +80’C
Output way : Jog, Self -lock, Inter-lock is Adjustable
Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Factory Original Setting is Momentary, please Choose the function or Change it by yourself.)
Press the learning button for one time, the indicator light turns on to off. Press the learning key on the remote controller, the indicator flashes one time and off. It means you learn it successfully.
Keep pressing the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.
How to change the working way:
A. Signal self-lock—Press button 1 to learn,each CH is independent.
B. Signal non-lock (jog)—Press button 4 to learn
C. Singal inter-lock—Press button 2 to learn
D. 1-3ch self-lock,4-6ch non-lock—Press button 3 to learn
E. 1CH self-lock, 5-6CH non-lock—Press button 5 to learn
Note:We default send 315Mhz, if you need 433Mhz, pls leave a message under your order, thanks!
1 x Receiver
4 x Transmitter (Battery not include)
240 total views, 1 today
Information about the ad poster
- Listed by: kamboj
- Member Since: February 3, 2016
Other items listed by kamboj
- Wireless PIR sensor with GSM Panel
- LUX sensor with extension board (15A)
- Light switch PIN Ball with socket (180degree) with Multiple Socket
- 10 Wireless Zone Kit with Panic Switch
- LUX sensor with extension board (multiple point)