4 CHANNEL WIRELESS RF REMOTE CONTROL SYSTEM

  • Email: 24kamboj@gmail.com
  • Mobile No: 9871578231
  • Street: uttam nagar
  • City: new delhi
  • State: Delhi
  • Zip/Postal Code: 110059
  • Listed: June 23, 2016 3:29 pm
  • Expires: This ad has expired
4 CHANNEL WIRELESS RF REMOTE CONTROL SYSTEM

Description

Specification:
1.Transmitter
Channel: 4 CH
Remote Control Distance: 50m/150ft
(Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference.)
Encode: Fixed code, soldering 2260 2262
Frequency: 315/433Mhz (Default 315MHz)
Power Supply: 1 X 12V/23A (NOT Include)
2.Receiver
Channel: 4 CH
Decode: Learning code
Power Supply (Operating Voltage): DC 12V
Relay: 20A/125VAC, 20A/14VDC
State current: ≤ 6mA
Sensitivity:-105 dBm
Operating Temperature: -40’C ~ +80’C
Output way : Jog, Self -lock, Inter-lock is Adjustable

Control Mode:
Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).

Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).

Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )

(Factory Original Setting is Momentary, please Choose the function or Change it by yourself.)

Learning Codes
Press the learning button for one time, the indicator light turns on to off. Press the learning key on the remote controller, the indicator flashes one time and off. It means you learn it successfully.

Clear Codes
Keep pressing the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.

How to change the working way:
A. Signal self-lock—Press button 1 to learn,each CH is independent.
B. Signal non-lock (jog)—Press button 4 to learn
C. Singal inter-lock—Press button 2 to learn
D. 1-3ch self-lock,4-6ch non-lock—Press button 3 to learn
E. 1CH self-lock, 5-6CH non-lock—Press button 5 to learn

Packing list:
1 x Receiver
4 x Transmitter (Battery not include)

Ad Reference ID: 31056bec5b3a4a60

No Tags

251 total views, 1 today

  

Sponsored Links

To inquire about this ad listing, complete the form below to send a message to the ad poster.